Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is a new pen that was developed by two guys in California. They wanted to develop a cool writing instrument that appeared as if a genuine pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.
The Smok Pen includes a built quality that’s just Juul Compatible Pods great. I found that even though it is an electronic pen the construction is just as good as the pens that I have reviewed. Simply because of how they made the most notable cap. You don’t have to worry about the cap cracking or breaking you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens is the form of the coils and just how that they are built. Generally the coil on a Smok Pen is larger than on other pens. I believe that they did this deliberately, to help make the pen feel more substantial.
If you take a glance at a Smok Pen, you will notice that the body of the pen is round and not smooth like other pens. On the trunk of the pen there exists a little tab that houses the coil. When you press on the tab it is simple to turn the heating element on / off. I must say i liked this feature since it allows me to utilize the Smok Pen 22 whenever I feel like smoking.
To use the Smok Pen you should keep the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it reaches the appropriate temperature you can turn off the heating element. Smok recommends utilizing a 22mm tank. I prefer a larger tank, but that’s just me.
Once you put your Smok Pen into the tank you will notice a indicator light seriously. The indicator light will stay green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen into the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids in to the coil heads.
After you have completed this step, you should always check to see should you be at the proper temperature for the coils to fire. Or even then you should turn the energy off and try again. For anyone who is still not satisfied with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I would call the “troubleshooting process” because sometimes things just usually do not work as they should. It is suggested that you perform the next two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.
Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. Once you have loosened this wire you can then access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful never to touch the coils.
Once you have placed the sub-ohm tank into the pen you need to then place the rest of the components like the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Start the energy and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has reached the temperature that it requires to reach you need to then connect the two wires to the negative and positive on the positive post on the Smok unit. You should then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s on / off switch.
After all the components have been placed in to the pen, you should turn the power on. After the first test run, you have to be able to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to take away the battery from the pen and replace it with a fresh one. For your convenience gleam green light that can be pressed to be able to confirm the battery charging status. When you have done these things and you do not see the green light indicating charging, you need to replace the battery.